1、题目：法兰盘机加工艺设计及钻模设计摘要:本次毕业设计中我所选的是铁路货车制动装置中的制动缸连接键法兰盘，根据零件图对其进行分析，之后进行机加工艺设计和夹具设计。在机加工艺设计中，采用几种工艺相对比方法来获得最好的工艺路线，达到节约时间提高劳动生产率的作用，再对各工序设计说明，最后将工艺过程制作成工序卡。本夹具设计是针对零件中的孔进行钻模设计，利用固定钻模以及螺栓夹紧装置，提高劳动生产率，保证加工质量，降低劳动强度。在本次的设计中，运用了机械制图、机械设计、机械制造工艺学等相关课程知识，以及查阅大量查阅相关书籍以及机械手册，并在指导老师的帮助下解决难题，最终完成了本次设计。关键词：法兰盘，机加工
2、艺设计，夹具设计Title: Flange machining design and drilling die designAbstract ： The graduation design specification in my choice of braking device ofrailway freight car brake cylinder is connected with key - flange, parts diagram tocarry on the analysis, according to the of machining process design and fix
3、ture design.In machine and process design, the method compared several process to obtain thebest process route, to save time and improve labor productivity, to each processdesign description, the process to make process card. This jig design is aimed at thehole in the spare parts to carry on the jig
4、 design, the use fixed drill jig and the boltclamp device, improves the labor productivity, the guarantee processing quality,reduces labor intensity. In this design, using the mechanical drawing, mechanicaldesign, mechanical manufacturing technology etc. knowledge, as well as access toaccess to a la
5、rge number of books and the machinerys Handbook, and solve theproblem in the teachers help, finally completed the design.Keywords:Flange, Machining process design, Fixture design.I目录前言.11.零件的工艺设计.21.1 零件的分析.21.1.1 零件的作用.21.1.2 零件的工艺分析.31.2 工艺规程设计.31.2.1 确定毛柸的制造形式.31.2.2 基准面的选择.41.2.2.1 粗基准的选择. 41.2.
6、2.2 精基准的选择.41.2.3 制定工艺路线.41.2.3.1 工艺路线的原则和方案选定.41.2.3.2 确定工艺路线.61.2.4 工艺装备的确定.71.2.4.1 机床的选择.81.2.4.2 刀具的选择.81.2.4.3 量具的选择.91.2.5 机械加工余量、工序尺寸及毛柸尺寸确定.91.2.5.1 加工余量的确定.91.2.5.2 确定切削用量及工时.101.3.工序设计. 111.3.1 工序 车削外圆. 111.3.2 工序 平外圆332mm 端面.141.3.3 工序 平另一端端面.151.3.4 工序 镗孔.171.3.5 工序 用钻模钻孔 613.5mm. 201.3.6 工序 铣削.221.3.7 工序 其他工序的安排.241.4.工序卡汇总.241.5.本章小结.26II2. 夹具设计.272.1.夹具设计思路.272.1.1 问题提出.2
